Silver based alloys Cadmium free

The following are general purpose brazing alloys, suitable to join easily a wide range of ferrous and non-ferrous base materials (steel, copper, brass, etc.).

Available in many different presentation forms (rods, flux-coated rods, wires, strips, rings, preforms, pastes and powders), they are very free flowing, ductile and strong.

All these alloys do not contain Cadmium, do not present the Health & Safety concerns associated with Cadmium-Bearing Alloys and are compliant with the RoHS regulation.

They are divided in two categories: alloys with Tin, and alloys without Tin;
Tin being used to lower the melting temperature of the alloy.

When brazing in an oxidizing environment (that is: in air), the use of a proper flux is required.

Code Composition % Melting Range
SOL – LIQ		 Density Tensile
Strength		 Corresponding
Standards
  Ag Cu Zn Sn Si °C g/cm³ kg/mm² DIN 8513 EN 1044 AWS A5.8 ISO 17672  
Silver-Copper-Zinc-Tin:
Ag60Sn 60 23 14 3   620-685 9,6 48 L-Ag60Sn AG 101      
Ag56Sn 56 22 17 5   620-650 9,4 48 L-Ag55Sn AG 102 BAg-7 Ag 156 Download .pdf: Ag56Sn
Ag55Sn 55 21 22 2   630-660 9,4 44 L-Ag55Sn AG 103   Ag 155 Download .pdf: Ag55Sn
Ag45Sn 45 27 25,5 2,5   640-660 9,2 43 L-Ag45Sn AG 104 BAg-36 Ag 145 Download .pdf: Ag45Sn
Ag40Sn 40 30 28 2   640-700 9,1 44 L-Ag40Sn AG 105 BAg-28 Ag 140 Download .pdf: Ag40Sn
Ag38Sn 38 31 29 2   660-720 9,1 45     BAg-34 Ag 138 Download .pdf: Ag38Sn
Ag34Sn 34 36 27,5 2,5   630-730 9 48 L-Ag34Sn AG 106   Ag 134 Download .pdf: Ag34Sn
Ag30Sn 30 36 32 2   650-750 8,8 48 L-Ag30Sn AG 107   Ag 130 Download .pdf: Ag30Sn
Ag25Sn 25 40 33 2   680-760 8,8 48 L-Ag25Sn AG 108 BAg-37 Ag 125  
Silver-Copper-Zinc:
Ag60 60 26 14     695-730 9,5 45 L-Ag60 AG 202      
Ag45 45 30 25     665-745 9,1       BAg-5 Ag 245  
Ag44 44 30 26     670-730 9,1 51 L-Ag44 AG 203   Ag 244 Download .pdf: Ag44
Ag40 40 30 30     660-720 9,1 46          
Ag35 35 32 33     680-730 9 48     BAg-35 Ag 235  
Ag33 33 33 33     680-750 9            
Ag30 30 38 32     690-760 8,9 50 L-Ag30 AG 204 BAg-20 Ag 230  
Ag25 25 40 35     690-800 8,8 45 L-Ag25 AG 205   Ag 225  
Ag20 20 44 36   0,2 690-810 8,7 43 L-Ag20 AG 206     Download .pdf: Ag20
Ag12 12 48 40   0,2 800-830 8,4 48   AG 207   Ag 212  
Ag5 5 55 40   0,2 820-890 8,4 48 L-Ag5 AG 208   Ag 205 Download .pdf: Ag5

Download .pdf: Ag55Sn | Ag56Sn | Ag44 | Ag45Sn | Ag38Sn | Ag40Sn | Ag30Sn | Ag34Sn | Ag20 | Ag5

Form